#运行用户
#user nobody;
#启动进程,通常设置成和cpu的数量相等
worker_processes 2;
#全局错误日志及PID文件
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
#pid logs/nginx.pid;
#工作模式及连接数上限
events {
#epoll是多路复用IO(I/O Multiplexing)中的一种方式,
#仅用于linux2.6以上内核,可以大大提高nginx的性能
use epoll;
#单个后台worker process进程的最大并发链接数
worker_connections 1024;
# 并发总数是 worker_processes 和 worker_connections 的乘积
# 即 max_clients = worker_processes * worker_connections
# 在设置了反向代理的情况下,max_clients = worker_processes * worker_connections / 4 为什么
# 为什么上面反向代理要除以4,应该说是一个经验值
# 根据以上条件,正常情况下的Nginx Server可以应付的最大连接数为:4 * 8000 = 32000
# worker_connections 值的设置跟物理内存大小有关
# 因为并发受IO约束,max_clients的值须小于系统可以打开的最大文件数
# 而系统可以打开的最大文件数和内存大小成正比,一般1GB内存的机器上可以打开的文件数大约是10万左右
# 我们来看看360M内存的VPS可以打开的文件句柄数是多少:
# $ cat /proc/sys/fs/file-max
# 输出 34336
# 32000 < 34336,即并发连接总数小于系统可以打开的文件句柄总数,这样就在操作系统可以承受的范围之内
# 所以,worker_connections 的值需根据 worker_processes 进程数目和系统可以打开的最大文件总数进行适当地进行设置
# 使得并发总数小于操作系统可以打开的最大文件数目
# 其实质也就是根据主机的物理CPU和内存进行配置
# 当然,理论上的并发总数可能会和实际有所偏差,因为主机还有其他的工作进程需要消耗系统资源。
# ulimit -SHn 65535
}
http {
#设定mime类型,类型由mime.type文件定义
include mime.types;
default_type application/octet-stream;
#设定日志格式
log_format main '$remote_addr - $remote_user [$time_local] "$request" '
'$status $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
access_log logs/access.log main;
#sendfile 指令指定 nginx 是否调用 sendfile 函数(zero copy 方式)来输出文件,
#对于普通应用,必须设为 on,
#如果用来进行下载等应用磁盘IO重负载应用,可设置为 off,
#以平衡磁盘与网络I/O处理速度,降低系统的uptime.
sendfile on;
#tcp_nopush on;
#连接超时时间
#keepalive_timeout 0;
keepalive_timeout 65;
#开启gzip压缩
#gzip on;
upstream localhost {
server 127.0.0.1:9090 weight=1;
server 127.0.0.1:8080 weight=1;
}
#设定虚拟主机配置
server {
listen 80;
#定义使用 www.nginx.cn访问
server_name 192.168.28.180;
#charset koi8-r;
#设定本虚拟主机的访问日志
access_log logs/host.access.log main;
#默认请求
location / {
proxy_pass http://localhost;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
}
#静态文件,nginx自己处理
location ~ ^/(images|javascript|js|css|flash|media|static)/ {
#过期30天,静态文件不怎么更新,过期可以设大一点,
#如果频繁更新,则可以设置得小一点。
expires 30d;
}
# 定义错误提示页面
#error_page 404 /404.html;
# redirect server error pages to the static page /50x.html
#
#error_page 500 502 503 504 /50x.html;
#location = /50x.html {
# root html;
#}
#PHP 脚本请求全部转发到 FastCGI处理. 使用FastCGI默认配置.
# proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
#location ~ \.php$ {
# proxy_pass http://127.0.0.1;
#}
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
#location ~ \.php$ {
# root html;
# fastcgi_pass 127.0.0.1:9000;
# fastcgi_index index.php;
# fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
# include fastcgi_params;
#}
#禁止访问 .htxxx 文件
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /\.ht {
# deny all;
#}
}
# another virtual host using mix of IP-, name-, and port-based configuration
#
#server {
# listen 8000;
# listen somename:8080;
# server_name somename alias another.alias;
# location / {
# root html;
# index index.html index.htm;
# }
#}
# HTTPS server
#
#server {
# listen 443 ssl;
# server_name localhost;
# ssl_certificate cert.pem;
# ssl_certificate_key cert.key;
# ssl_session_cache shared:SSL:1m;
# ssl_session_timeout 5m;
# ssl_ciphers HIGH:!aNULL:!MD5;
# ssl_prefer_server_ciphers on;
# location / {
# root html;
# index index.html index.htm;
# }
#}
}
- 浏览: 93887 次
- 性别:
最新评论
-
xiaotao0511:
博主在吗,按照你的配置方法,我试了一下,在xml里用${}的方 ...
分布式配置文件管理工具disconf部署以及运用 -
spjich:
bitcarter 写道这样的系统是我一直希望做的,不知道现在 ...
实时公交位置系统的实现 -
spjich:
wengyao 写道判断方向,返程回程,是否到点都将会存在误差 ...
实时公交位置系统的实现 -
wengyao:
而且现在广州的行讯通估计就是利用报站实时提交站点信息,可以准确 ...
实时公交位置系统的实现 -
wengyao:
判断方向,返程回程,是否到点都将会存在误差。感觉现在用报站器, ...
实时公交位置系统的实现
相关推荐
nginx配置 nginx配置文件参考 nginx配置文件参考
Nginx配置文件原始版本,这是刚下来的Nginx服务器最原始的版本内容,下载覆盖即可。
Nginx配置文件 nginx.conf 详解doc文档
在此记录下Nginx服务器nginx.conf的配置文件说明, 部分注释收集与网络. #运行用户 user www-data; #启动进程,通常设置成和cpu的数量相等 worker_processes 1; #全局错误日志及PID文件 error_log /var/log/...
nginx.conf nginx-1.20.1.tar.gz 这是关于centos8的nginx 和nginx 的配置https文件
Nginx配置文件说明.一些配置文件中详细参数的说明,可以看看。
nginx配置文件修改保存,自动加载重启,并检查配置文件是否修改成功。 Windows下使用nginx,启动之后,再修改配置文件,无需命令重新加载,修改保存配置文件,实时更新nginx重启。
解析nginx配置文件,并将nginx配置文件格式化成对象,方便java程序管理nginx配置。解析配置文件并非使用正则匹配,而是使用语法分析树处理解决的。 标签:nginx
使得notepad++编辑nginx的配置文件(.conf)时,支持语法的高亮显示,非常方便
一个完整的nginx配置文件范例参考(含负载均衡)。学习,支持开源,支持nginx
nginx配置文件-安装客户端ip进行转发 具体可查看zip包中的nginx.conf及default.vhosts.conf
基于docker容器的nginx配置文件,包含反向代理和负载均衡配置,具体使用和操作可以参见我的博客 nginx docker下搭建环境和配置文章
client_body_timeout 3m; send_timeout 3m; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65;
docker安装nginx配置文件
Nginx 配置文件
Nginx配置文件的对应模块及模块属性详细说明。此外,还有一个实例帮助更好的了解Nginx配置
对nginx配置文件nginx.conf各个表示的意思进行解释,方便新人学习
nginx配置文件中斜杠/的6种含义 nginx配置proxy_pass时,/的6种含义+没有/的含义 nginx配置proxy_pass时,斜杠的6种含义,不写斜杠/的含义
nginx配置文件vim语法高亮与缩进.docx
一个开源的Linux下运行的命令行工具,能将Apache的配置文件转换成相应的Nginx的配置文件。本工具能自动将Apache Web服务器的配置文件转化成Nginx的配置文件,减少WEB服务器迁移的工作量。 该工具从Apache Web服务器...